It’s a breadboard with an extender for a Raspberry Pi’s pins flipped upside down, a Raspberry Pi Pico, jumper wires, and a clip that came with a CH341A that suffers from the issue of being 5V.

The issue I think would be length of the wires.

Any thoughts? I’d consider soldering something together but I don’t have a soldering iron that would be great for something so small and I’m working with what I have on hand.

I also have a Raspberry Pi 4 and the CH341A that has the voltage issue if anyone has a better idea that might work.

  • Corroded@leminal.spaceOPEnglish
    10·
    20 days ago

    Correct but it can be used to flash Libreboot on devices like the ThinkPad I mentioned in the title.

    I’m asking if this configuration would be effective considering I’ve heard of people having issues with longer wires causing problems. Adding jumpers and a breadboard is just adding to that length.

    • BCsven@lemmy.ca
      1·
      20 days ago

      Is the wire length problem some sort of latency issue or a resistance issue?