I bought one based on this thread, but only set it up a few days ago.
Two days ago, my five-year-old requested that I print them a cat. I downloaded two cat models, one that was print-in-place bendy and one that was meant to test your calibration. I tried to print both, but both of them caused the printer to hang after displaying "stop processing, please wait … "
I spent several hours testing and troubleshooting this, only to find an old thread saying that the printer firmware can’t handle filenames between 6-9 characters (not including the extension), meaning the filenames could be 5 characters or fewer; or 10 or more. I had named my files calicat.gcode and flexicat.gcode. After adjusting them to be longer filenames, everything started working beautifully.
I’m very happy with the printer now that I know that, but it seems such a random error that it was very frustrating to try to fix. I thought my printer arrived broken. Hopefully if someone else encounters the same problem, they find this post and it fixes their problems!
I have never actually tried printing off the device itself, the touch screen is very confusing. I always submit print jobs over the network via OrcaSlicer. But yes, that is exactly the kind of thing I meant when I said it has some odd quirks.
I printed a few things by sending directly from the Qidi slicer that came with it, but it pretty consistently is crashing at 40-80% when connecting through the network. I’ve been using the web interface directly and that’s going pretty well.
I bought one based on this thread, but only set it up a few days ago.
Two days ago, my five-year-old requested that I print them a cat. I downloaded two cat models, one that was print-in-place bendy and one that was meant to test your calibration. I tried to print both, but both of them caused the printer to hang after displaying "stop processing, please wait … "
I spent several hours testing and troubleshooting this, only to find an old thread saying that the printer firmware can’t handle filenames between 6-9 characters (not including the extension), meaning the filenames could be 5 characters or fewer; or 10 or more. I had named my files
calicat.gcodeandflexicat.gcode. After adjusting them to be longer filenames, everything started working beautifully.I’m very happy with the printer now that I know that, but it seems such a random error that it was very frustrating to try to fix. I thought my printer arrived broken. Hopefully if someone else encounters the same problem, they find this post and it fixes their problems!
I have never actually tried printing off the device itself, the touch screen is very confusing. I always submit print jobs over the network via OrcaSlicer. But yes, that is exactly the kind of thing I meant when I said it has some odd quirks.
I think my first print was with the touch screen.
I printed a few things by sending directly from the Qidi slicer that came with it, but it pretty consistently is crashing at 40-80% when connecting through the network. I’ve been using the web interface directly and that’s going pretty well.