Hello there,

after a few years of being out of the hobby I am starting to get interested again after seeing that a lot of budget printers now are having all the features that my old one were missing. Direct extruder, auto bed leveling, dual z axis, stuff like that. So which one of the budget printers around 300€ would you guys suggest one should get to get started again? Elegoo Neptune 4? Creality Ender 3 V3? Anycubic Kobra 2? Sovol S06? There are so many good looking options that I am interested in your experiences and opinions. Thanks!

  • j4k3@lemmy.worldM
    link
    fedilink
    English
    arrow-up
    17
    ·
    7 months ago

    I’m biased to say save and get a Prusa. It is what I did. It is not a printer project. The hardware specs are a misnomer. The continuous investment in the community is the real selling point. I spent more initially, but my Prusa is still worth nearly what I put into it even as a MK3S+ when the 4 is a thing. Everyone knows it will still work, and continue to do so, while parts will always be readily available. No one worries that it is some failed project.

    Now if I tried to sell my little modified KP3S Kingroon, that thing is pretty much worthless now even though it works okay most of the time. I spent more on it at $200 than I did on the Prusa at just over 3× as much. I barely used the KP3S, wasted $100 on “upgrades” and it is now all loss. I got it after the Prusa knowing it is a project to screw around with. Spending more can often mean spending less when you consider long term value. That is just my personal opinion. I don’t regret buying the Prusa.

    • marc@feddit.de
      link
      fedilink
      English
      arrow-up
      11
      ·
      7 months ago

      Same Bias here. Bought a Prusa Mini and got a working printer. In 3years I did nothing to the machine than cleaning and lubrication, and it still prints like day 1. Last year I got an update that enabled input shaping - on a machine that was out of warranty for close to a year already…

      • Decitizen@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        7 months ago

        Ditto. My Prusa mini has been great, just an occasional clean. Got the mainly pre built one. And putting it in an enclosure really made it consistent too…

    • Kuro@feddit.deOP
      link
      fedilink
      English
      arrow-up
      8
      ·
      7 months ago

      That’s one option and the one I was also thinking about. But it is triple the price for a few of the budget options.

      • Landless2029@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        ·
        7 months ago

        Speaking as someone who wetn cheap and got an ender 3. I’ve spent 90% of my time with printer maintenance and calibration. Not printing…

      • mark3748@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        5
        ·
        edit-2
        7 months ago

        You buy a budget printer if you want to get into 3d printers. You buy a prusa if you want to get into 3d printing.

        If you want to learn how everything works, you should get a kit. After it’s assembled you should be able to print nearly endlessly with nothing more than basic maintenance.

      • PlasticExistence@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        7 months ago

        If you value your time more than you like to tinker with your printer, then the cost makes sense.

        If you like to do more maintenance and prefer to save the money up front, then the budget printers make sense.

    • AliasVortex@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      ·
      edit-2
      7 months ago

      You raise a very excellent point, for what I’ve spent toying and tinkering with my OG ender 3 pro, I very easily could have bought a nice Prusa/ Bamboo/ Voron printer.

      That said, I can’t say I regret the thessian ender route either. I’ve learned so much about not just the printer itself and how it works on a fundamental level, but also how to model and design for the materials I’m working with and the capabilities of my machine I’m way more comfortable working with small electronics (wiring/ crimping/ soldering and am even flirting with PCB design) compared to when I first got into the hobby. I tend to be more of a hands on learner, so I enjoy the project printer (to an extent) and the learning experience that comes with it.

      It very much depends on what OP is looking to get out of/ do with the printer, I 100% agree if it’s more of a "I just want it to work ", a Prusa or other mid-range printer* is probably the better play than something in the budget range.

      * Depending on how OP feels about Bamboo, the A1 may be a good option on that front as well (once the teething problems get worked out)