You might also consider vintage razors, a lot of them are brass and they’ve stood the test of time to get this far.

Alternatively, if what you really want is machined stainless you can probably get it for that price from dscosmetic or yaqi on AliExpress. They have many models so it’d be worth searching out some reviews.

I’m unsurprised to see an overlap between meditation and straight razor appreciation. After all, using, honing and stropping my straights are some of my favourite meditations though I still try to keep a more formal practice.

There are also thick framebacks but they’re basically just like a light wedge so I think you’re right to prioritise the Japanese ones.

I like the look of tapered blades and was lucky enough to score one but it’s been at my brother’s place waiting for scales for a while now. One day.

Rattlers are neat but also basically feel like a light wedge however I have this one smaller one I quite like, took a nice edge, slight smile, etc. sometimes a razor just fits.

“Lancet” is what Mappin called these, but there have been a few imitators and while I’ve not tried one quite like that though I have this one with a hollowed out spine that maybe is at least in the same sort of category? Heh, actually that mailcall is pretty topical overall, even has a lather catcher.

Yes, but I have 100 FHS-10 blades and no other razor to use them in😅

Good call on the Audiostrop then, much more appealing than the Oneblade (which I never really felt drawn to in any way) and I liked the noisy feedback from it though I did move mine along as I could get a similar effect from the Wilkinson.

Edit: closing a stray image search tab I spotted this link to an especially nice lancet-ish razor.

For frameback be sure to try one of the thin Japanese ones, they’re almost like a stiff hollow and kind of sing. Hm, others… have you tried a lancet blade? Sheffield with a rattler grind? With a taper? Oh! What about the Wilkinson Pall Mall / Dunhill? It takes (quarter hollow) wedge blades but can use Gem too. Not only does it have a roller guard but you can adjust the exposure. Neat thing.

Speaking of Gem blades, you know you can pull the spine off a Gem and use it in that Autostrop right?

Does your 472 have the decorated spine like the worn one I picked up early in my exploration of straights and still keep with the edge it came with as one of my references? https://imgur.com/a/QJX47Yg

Thanks for sharing! I must admit, I was slow to come around to this way of thinking, one soap (Williams), one brush (house brand badger), one razor (Merkur 38c) for years but then I tried a straight razor and that all went out the window so on top of the comprehensive arsenal of straights I have a whole spectrum of soap, various DE new and old (even a few vintage blades), Gem razors, injectors (the twin blades from Japan are amazing), a lather catcher, Rolls, and a Wilkinson Dunhill where I hone the blades (pretty much the same as the Pall Mall). And today I tried this new giant tub of unscented soap I bought for some bizarre reason.

Very glad for the chill low key hobby, I think my favourite part is the utter lack of urgency, and as a bonus my kitchen knives have never been this well maintained. Plus theoretically I can recoup most of the (not life changing) money if I ever have need of it and the stuff is small, it’d all fit in an unremarkable box so I don’t really see any downside.

• Razor: Weck Sextoblade
• Blade: Kismet (2)
• Brush: Mühle 23mm STF
• Lather: Canada Shaving Soap
• Post: Thayers

My one-pass few-variables shaves continue. Kismet blades are nice, this went better but maybe it was the soap–my Canadian MdC tribute showed up quickly (snagged one of the last two they had at amazon) and wow, the tub was so full it didn’t quite close. Needed to add water as I unexpectedly loaded a sizable amount of soap, I think I expected it to load slower being so hard. Very slick, and very unscented unlike MWF which I find stronger than I expected (though unobjectionable).

I think I saw someone complaining that the B-20 has rounded corners and barely hits the posts on their injector so it might be perfect for a shavette.

Sorry, I just peeked at the config options and have never run any of this so no idea about the interaction with Lemmy or how to troubleshoot that. What I’d do though is spin up a toy instance on another subdomain/locally in a container and try to reproduce it there. Maybe with a copy of the data from production if that’s easy enough to pull off.

But ya only in retrospect - I wouldn’t have expected changing the banner or icon to be a risky operation.

Just poked around because I was curious, it does look like the config for pict-rs lets you specify a format to convert things to and a max size/quality: https://git.asonix.dog/asonix/pict-rs/src/branch/main/pict-rs.toml#L237

I’d suggest WebP with a quality of 85 and max dimensions of 3840x3840 (because 4k is 3840x2160).

That takes djundjila’s photo for today (a 4236x2677 jpeg) from 1.9Mb down to 360Kb for a 3840x2427 WebP.

You might also consider AVIF as that’s widely supported as well and looking like it’ll probably become the new standard but for now is a bit CPU intensive until CPUs start adding SIMD for it. Too bad JPEGXL lost momentum, it was kinda better (and less CPU intensive). But if the server doesn’t mind chewing on it …that same SotD as a quality 66 AVIF is just 160Kb, eg. less than a tenth the size.

For more info about quality settings: https://www.industrialempathy.com/posts/avif-webp-quality-settings/

Thanks for your efforts and yay, that works here too! I can paste them even. Nice. Interestingly, I copied a JPG by right clicking in Firefox and it wound up as a PNG when I pasted that. But maybe that’s the browser? Still, it’d be neat if the site converts to something more efficient like WebP and maybe caps the res at 4k …though maybe storage is cheap enough at this point that we could each put a full res SotD from our phones for the next decade without really being a burden? …and now I wonder if the transcoding can be done client side via wasm or something. Yawn, I should sleep, rambling.

Oh! One thing though: earlier I tried pasting my SotD to another Lemmy instance to see if that works and it did fine. I didn’t post it and cancelled the preview. However the image stuck around. Wondered if and how those get mopped up, maybe a cron job? It seems to be there still some hours later, might check tomorrow just out of curiosity.

(heh I think you restarted while I was trying to post this so will also be interesting if the image persists, though presumably shouldn’t be orphaned now that it’s referenced in a comment?)

• Razor: Kai Excelia
• Blade: Kai Mild (4)
• Brush: Omega 10015 22mm boar
• Lather: Mitchell’s Wool Fat (tallow)
• Post: aloe

Been messing around with some honing experiments on troublesome razors and wanted to give my face a break so last shave I used my Fili as that’s usually a nice vacation. It was almost but I’m not sure if it was the state of my face, not having used that blade in a while or maybe I really do have a bit of a reaction to Darkfall so I figured let’s eliminate some variables and find out about the soap, I’d been meaning to get to know this new Kismet blade a bit better and compare to AC so I’m going to stick to unscentedish soaps and one pass shavette shaves with quality blades for a bit. That’s almost a theme thingy, One’n’done’tober 11vember …something. But I’m not quite that organised and will start messing with it soon enough by seeing how Darkfall goes once I do a few of these then maybe digging out some paste edges to compare to the shavettes.

I like Kai AC blades. This was nice, been a while. Feels a bit sharper than the Kismet yet less stressful as this setup seems less pointy (even though the corners are muted on the Kismet) plus the extra weight lends stability. I guess AC is the wedge shavette and Weck the hollow.

Oh, and this inspired me to order the Canada Shaving Soap I’d been vaguely interested in for a while (as it’s rumoured to be comparable to MdC). So far I’d resisted as why would I use that much unscented? But it does have a place and maybe it’s SV-ish too, was really enjoying SV lately so here’s hoping. Looks promising anyhow: https://www.badgerandblade.com/forum/threads/canada-shaving-soap-review.614669/

https://i.imgur.com/joMktr1.jpg

Which gap do you have for the WR4?

Side note: Uploading pictures is so much faster since the migration. It’s almost like having pictures didn’t have to be a PITA 🤔

Heh, welllll… I just tried to upload one. I get an HTTP 400 from the post to the /pictrs/image endpoint and the response body is Request error: error sending request for url (http://pictrs:8080/image): operation timed out. I thought maybe because I was pasting a largish image so I tried a 350kb or so JPG and clicked the upload button …nope, same deal. Oh, and the UI tries to parse the body of the error response as JSON so it pops up a red box with SyntaxError: JSON.parse: unexpected character at line 1 column 1 of the JSON data.

Thanks, this is way, WAY faster.

Thanks, that’ll do for my purposes anyhow as I only get around to this once or twice a year so we’ll probably have something set up by the next time I bother to list something.

Curious what you’re referring to re: username spoofing though, that seems concerning. Do you just mean the ability to create walden@lemmy.world or something and potentially confuse users that don’t understand the federated nature of the platform? Or something sneakier?

I am selling some interesting straight razors over on Reddit as that’s where the audience is but I really appreciate the community here and the idea of federation. So I’d totally give you guys a 5% discount (and another 5% if I recognise you and we work out a trade or some way you can pay me without my covering paypal fees). They’re also just a neat and varied bunch of razors that I think are also worth a bit of show-and-tell (won’t be too sad if I wind up hanging onto them for a while yet).

(I first sought approval for this unusual use of the thread.)

I’m really enthusiastic about the idea of community controlled platforms so I prefer to engage here rather than Reddit but am selling some razors over there due to the larger audience. We don’t seem to have a community sales thread in this sub though, so which would be the most appropriate thread if I wanted to link that and offer Lemmy users a discount? Maybe the show & tell could be broadened to also including showing what we have on offer? Edit: wound up posting this comment

Thanks and you too. I had two negative tests but saw some anecdotes that these kits have a very high (like >50%) false negative rate (but few false positives) so I’d probably have to do a bunch to really say anything conclusive. Especially since they apparently do even less well with current variants.

Thanks! Things are looking up so here’s hoping… also hope you guys rid yourselves of it soon enough.