No idea, but I put it together from ideas around algorithmic decision making and anarchistic thought. Design a society where you would be happy to be dropped in as a random person and you can’t have massive power and wealth imbalances. As soon as you get rid of the idea that you will be on top you gain the drive for equality and fairness.

If nobody wants to do a job then people will pay more to not have to do it. In that way people getting paid to do shitty jobs at least get well compensated and that makes the job more attractive, leading to it being less shitty.

First, start big. Get the basic shapes right with large lettering. Ideally you would have something you are comparing to like a stencil or grey printout so you can see the difference between your writing and the target.

After you have the shape fairly good large you can shrink it down. You can take your time getting to that and just make a little progress at a time.

If you find it impossible to shed your current handwriting consider using grid paper to force spacing and maybe try your non-dominant hand.

There are a bunch of approaches but one I like is to have everyone vote on the relative pay for each role except their own, so customer service doesn’t vote on customer service pay ratio but votes on everything else. Once you have agreed upon relative pay you then take the total budget for pay and divide it among the whole staff according to those ratios. Nobody will vote for the CEO to make 300 times what someone else makes but they will vote for higher pay for jobs they don’t want to have to hire again for, say shitty jobs or complex jobs. This means the hardest to hire for are retained, the ones who make work easier for others are retained, and the ones who are making life hard for others get reduced. It also means nobody will have to feel that they didn’t have a fair shake, they got to vote and voice their opinion but the group has voted. Also, who really feels OK paying someone a pittance? Exactly the type of people who will be pushed out of this type of structure.

Just a quick point for your photos in future. You probably want to try using HDR mode. HDR (High Dynamic Range) takes a set of 3 photos at different light levels and mixes them to squeeze the full range into a photo rather than having some parts completely black and some completely white. Give it a try if your phone camera supports it. You need to hold very still for the photo to work otherwise it will be blurry, but the quality is fantastic if you can be still.

I work in individual support under the NDIS in Australia. The NDIS (National Disability Insurance Scheme) is a system that disabled people can access to fund various needs not covered by our medical system. I help one client who has had a stroke with eating and massage, another client with woodworking and metalworking, another with cleaning and organising their house, and really anything else they need.

It is really flexible and allows us to meet their needs, not what someone else thinks their needs must be.

Today is a good day to be Deleted

My understanding is you make fewer but more replicable mistakes. If you use a wire you have to trace it, keep the length consistent for timing reasons, use very consistent soldering technique, and ultimately you have a hard time tracing issues. With a homemade PCB you generally do get what you ask for in terms of circuitry. Traces are the right length, right thickness, right spacing, and if not then the whole board is similarly impacted, so it is obviously broken or not broken. If you mess up your design then you have a problem, but if you did the process right and you have a valid design then it works.

That all said, homemade PCB is a large time sink and modern PCB manufacture is so cheap and fast it doesn’t make sense to do at home for the most part. You can literally get a complex board faster by ordering it from halfway around the world and having it posted than making it yourself. I would say it is a good learning exercise, not a good manufacturing or prototyping practice.

The payment of hush money would have counted as a campaign contribution regardless of the source. If he paid it personally it would have been reportable. If Cohen paid it it would have been reportable. If a third party paid it it would have been reportable.

The reason it would have been reportable is because it provided benefit to the campaign. Covering up negative news is a benefit to the campaign, so if he paid it himself it would still have been a campaign contribution he would have to report.

By covering up the payment he is taking or making a campaign contribution in violation of FEC rules. By suppressing the story of his affair with Stormy Daniels he is contributing to his campaign and failure to disclose makes this a crime.

The fact that he committed a crime by failing to report a campaign contribution is what makes the payment itself part of a felony rather than a misdemeanor. In New York law they do not have to prove the specific electoral crime itself for this set of falsifications of business records to be related to a felony level crime and therefore felonious. The jury instructions approved by the judge specifically say that the jurors can find that he violated one of several options of law for raising this to a felony.

To be clear, it is not a hush money trial. It is an election interference trial. Hush money is not actually criminal in and if itself, the fact that it was used in relation to influencing an election is what makes it a crime. It is election interference.

Don’t forget Alpha Phoenix, he does similarly crazy fun science stuff and has a lot of fun doing it.

Also Integza, Explosions&Fire, Extractions&Ire, NurdRage, and so on.

Also scooby based leather is a newer vegan option making progress. It is the bacterial mat from the top of kombucha and is able to be dried, tanned, and oiled until it is a very nice alternative leather, no plastics in sight. Also, my spelling may suck on scooby, maybe scoby or something else.

The squat huff. One single motion, one sound, one life, one love.

I agree with many of these points, but have two thoughts here. First, the same was true of many items being produced in China in the past, but quality control got better and honestly most of the products you can buy for a reasonable price are partly or wholly made in China. Second, Tesla is a good example of a US based company with many of the same issues. Loose panels, door handles that fall off, accelerators that get stuck, and so on. Bad engineering is not only available in Mandarin.

I hope they can produce a good quality electric car and help accelerate the transition.

I had a psychiatrist for my ADHD who went off the deep end on Q and Trump. It is entirely possible to get a high end degree without critical thinking skills, so seeing someone with at least 10 years of university, medical school, and specialisation in psychiatry going off the deep end is not impossible, just a bit odd to process.

That said, I think Australians tend to be a little more up front than North Americans, so when someone seems to just spew whatever they are thinking they seem more familiar. That said, someone spewing garbage should not be seen as normal but here we find ourselves I guess.

Nah, we have what we call casual racism, but the real far right intense stuff is a vocal minority. I live in regional NSW and we have a growing immigrant population, largely from Asia and Africa. The colour difference between what was here 5 years ago and now is there if you care to look but honestly it is just people being people for the most part, nobody really seems to care. That said, our billionaires are a major issue and government capture seems inevitably unless major reform goes through.

Yeah, meds are not the solution to all problems. Some meds can at some times be useful for some people, but it is not appropriate to just blanket the population with benzodiazapines and consider the population to be mentally healthier. All sort of other stuff like improving social connection, reducing working hours, building skills, and so on can do a lot more to reduce anxiety and depression, but where is the funding for a local community garden or woodworking class?

Australian healthcare is actually pretty amazing. I had endocarditis last year and had two collapsed lungs with my blood oxygen plummeting and no clear reason for the infection. The bacteria ate one of my heart valves so my heart had to do 4 pumps to have the effect of one, pushing my heart rate up to around 140 bpm while sleeping. I was flown from my regional town to the best hospital for the job and had an emergency valve replacement. I was up and walking 2 days later and I was flown home a couple of weeks later. I now take Warfarin and will for the rest of my life, along with a beta blocker. My biggest healthcare costs involved with this whole thing is my monthly medication cost of about $30 from 5 prescriptions including ADHD medications.

That all said, mental health care is not as good here as it used to be nor as it should be. We had a conservative government for 12 years and they absolutely gutted the mental health care system. They cut funding for extremely effective programs and did some real harm to vulnerable people (if interested look up robodebt). So yes, mental health is not great here. It is way better than in the US or in the UK but it is not in line with best practice research.

The fact that we can do better does not eliminate how we we do. I didn’t die from something that should have killed me, and this is the second time I have had a really major injury that required surgeries and so on. Well, third technically. Still, I have never paid a cent at the time of use for any medical care and I have paid for the medical care of others with my taxes. Am I coming out ahead of my costs? I hope not to be honest. I hope I have contributed more than I have cost the system because I care what happens to other people. I hope I have paid my way but I will be sure to honestly file my taxes every year knowing the system I am paying in to is the same one that has saved my life. Again. Man I am stupid.

Man, it looks like AI art the spelling is so bad. Impressive.

Have a look at this link

https://linuxways.net/mint/setup-wine-linux-mint-21/

It has steps for enabling 32 bit support, around step 2 enables and step 3 installs wine again after. You need to go through the wine install again after enabling 32 bit support (i386). If you don’t get all the packages with :i386 at the end remove wine and then install again.

With the upload, if it isn’t bittorrent it may be corrupted without being checked. Maybe look for an md5sum and confirm you have the file as expected. If the md5sum checks out you are sorted, if not you will at least know. That said it is as you say very unlikely to be the file, much more likely the libraries. Let me know how you go.

OK, so a few possible starting points. It looks like you are running a 32 bit programming but may not have all the 32 bit libraries installed. This may be referred to as multilib or similar, but you need the 32 bit versions to run 32 bit software properly.

Second, if the above doesn’t solve it you may be having the same issue I had with Arcanum. I had taken a rip many years back and it had been corrupted so it would segfault like yours is. The solution was to find an alternate image of the disk which was clean and using that.

Good luck