I bought a monitor since the smarts in my smart-tv died, making the entire display unusable. Now I wanted to use a separate SBC for smarts in the “dumb” monitor. I would have gone for a modded fire-stick, but Amazon in their infinite wisdom, sunset all versions except the 720p potato and the smart-speaker-cube. I’m currently using a RaspberryPi 4 and looking at argon one for a remote control case. Googles widevine does limit the DRM on some content I “own” though. With Amazon on course to EOL the more sane sticks, are there any well-moddable streaming-sticks/boxes, that bring the relevant codecs and DRMs?
Personally I just run a ThinkCentre mini pc with Fedora. Bluetooth keyboard/trackpad; Sorted. Not as convenient as a remote but don’t need to fiddle with stuff.
You can get them cheap used on eBay
If you just don’t like ads AppleTV works great.
That said if you’re set on something less locked down you might look into Dune-HD boxes. They have some that have a dual OS. One is Android TV (not sure how mod-able) the other is Linux that can have other kinds of apps. They’re virtualized and accessible without a reboot. They have great codec support. Just realize only some of their models have the Android TV dual system thing.
I believe the Apple TV to be (still) quite decent in that respect, but judging from the post that’s not an option?
I’d say put your RPi4 in a Flirc passive case and use Kodi via LibreElec.
The Argon One connects the fan control in a funky way so your OS must have some way to configure the fan controller. I know Batocera v41 has Kodi 21 built in and their wiki says how to get an ArgonOne working properly. You can then have it set to boot into Kodi and have retro emulation as a secondary option.
From what I’ve seen, the argon does passive-cool alright too. With Flirc I’d need to keep the mini-HDMI-dongle and buy a separate IR dongle, that takes up a usb-slot and doesn’t have a low-power MCU. My Pi is currently in a no-name passive-case already. Unless I misunderstood you, I don’t see the advantage.
It sounds like my case recomendation doesn’t fit your needs. However, the rest of what I said still stands
As far as I can tell there are two separate worlds, with close to no overlap.
On the one hand the mainstream stuff, proprietary, DRM compatibile, interner dependet, non moddable, no privacy, no way to own your content, tracking you from asshole to appetite, often ad-infested.
Best you can hope for is some Android TV streaming box, but the moment you start to do stuff like root it or unlock the bootloader some streaming apps might decide to stop working, or degrade your quality. DRM-protected streaming services will completely refuse streaming high-quality content to any hardware you really control.
On the other you have self-hosted, often open source, tweakable, local, customisable, technology, compatible with all codecs you want, but functionally blocked from DRM. There is essentially no way to legally acquire video content for the second one. You could get a libredrive compatible BD reader and rip your own movies, but that’s still illegal in many countries, certainly the US, and is a ton of work.
If you have sufficiently powerful hardware, you might be able to stream low-bitrate 720p with software decoding. They won’t serve you better stuff. Anything better than that, you should consider it accidental and likely to stop soon.
Yeah, it’s kinda telling, if you look at my prime subscription for example. I can either:
-
Hook into the web-service with Kodi, breaking TOS and theoretically risking the account. While Google, missing their widevine tax, limits the quality.
-
Pirate the same content without an account, at full 4K.
It’s truly a service problem.
Yes.
Not quite. The Kodi plugin still uses Widevine. You just don’t get higher quality content unless your hardware is “certified” with some key burnt in at the factory, or some such nonsense.
Yes, that’s what I meant by “widevine tax”, the certification is done by Google for a fee.
-
ugoos box with coreelec. I use the am6b+. Only format it can’t play is av1
stock runs a stripped down version of android with 0 ads that is very barebones so if you just want streaming apps this is for you. I use this part for my IPTV client but basically any streaming app available on the play store or that can be side loaded with an apk works
You can also flash coreelec and run kodi natively. You can just use the android build of kodi but using the coreelec build has many advantages; it can boot directly to kodi, it’s much snappier within the ui, and most importantly there are far less (basically no) issues with content playback. This option can basically play any file you throw at it natively. You can also set it up to stream files from a pc/nas with jellyfin/plex/emby but this is really the setup for weirdos like me that refuse to subscribe to streaming services (aside from an iptv provider).
Notably the ugoos is the only device, currently, that is licensed to playback Dolby vision content and actually does so properly.
Literally every other option, amazon stuff, shield, chromecast, appletv, pc directly connected to tv, the internal players of TVs, etc don’t play back Dolby vision content correctly in some way. Either they fail at playing certain profiles, they have issues with color accuracy, they flicker, etc. obviously this depends on your setup though, if you have a Samsung dv is meaningless unless you plan to get an oled at some point. That said even if dv is pointless for you it still does hdr/hdr10+ and all the lossless audio stuff/audio pass through
If Dolby vision and av1 are important to you the coreelec team have extended their work to other devices that have av1 support. Do research though because not all of them are fully supported, like some you need a usb Ethernet/wifi adapter which is dumb
Downsides are that it’s tough to set up, like you should be a tinker type person. This is a bit more of a pain than an apple tv or a shield. Also it’s not the easiest thing to get support
But if you’re like me and you’re super paranoid about streaming services harvesting your watch data and selling it, plus super frustrated that they continually fragment and want yet another $17 to access another library that you only want 3 shows of while increasing prices every year and still shoving an excessive amount of advertising in despite having you pay for the service, I would highly recommend just pirating media and using kodi/jellyfin to locally stream.
As an added bonus you get a noticeably higher image quality if you download stuff sourced from physical media because most (tbf not all) streaming networks have shit quality, much less likely to have issues with buffering or the stream dropping from 4k to 480p because the bandwidth wasn’t there for 4 seconds, often can get much better subtitles that are timed and syncd (and in the case of anime like animated and shit), etc. plus no ads, ever, no data harvesting (disconnect your tv from the internet so it doesn’t use brightness patterns and power usage to determine what you’re watching!), no corporate censorship (my collection has Daria with the original music and not the “soundalikes” because mtv couldn’t be bothered to relicense the music. It also has all the blackface episodes of various shows like community and it’s always sunny because I can decide whether something is offensive or satire for myself without netflix or disney to act as a nanny)
+1 for Ugoos. I use an X4Q Plus, which has av1 support, but other than that I did the same setup: coreelec nightly (I like living on the edge). I have a complicated setup due to my networking paranoia and coreelec handles that without issue. I loaded coreelec onto a micro-sd but haven’t used the default android that it came with since day one.
My only real complaint is that SOME av1 files have playback issues, and some play flawlessly. I’m no expert so I haven’t any way to figure it out, and I’ve been too intimidated by the community to try to seek help or report a bug.
That being said, av1 isn’t meant to be an archival format and realistically only excels at network streaming, so it’s better to look for x265/hevc content rather than av1 if all you’re doing is playing locally (or even playing from a NAS on your local network). and, of course, x264 is still pretty much the standard, with the downside being higher filesizes for the same level of quality.
How is the x4q plus? I frankly dont care about av1 (I’m a store everything in remux/flac person) but the x4q, theoretically, should have a faster processor than my aging am6b+
One suggestion I would make is to copy your install of coreelec onto the emmc directly. In my experience that makes everything a bit “snappier”, it’s easy enough to do, and only takes a few minutes.
“SSH into you device; then run ceemmc -x; type in Y; then type in 1. Once the process is complete, remove your external media and enjoy. To speed up CoreELEC installed on the eMMC on Ugoos devices, go to Settings-> CoreELEC → Hardware → eMMC Speed Mode and change it to HS200/HS400”
it’s plenty fast. i have a usb-attached nvme for the stuff i download to watch that I don’t intend to keep, and my main collection on a separate NAS. the microsd I run coreelec from is a samsung evo, i think it’s an A2 and it’s plenty fast. I haven’t installed coreelec to the emmc because i’m running nightly so it’s a decent fallback when CE breaks which does happen once every few months - and allows me to easily make a backup using dd.
there was an issue with x265 playback being out of sync slightly (which could be remedied by seeking back or forwards one step, i used to just do it at the beginning of playback), which persisted for more than a year, but that was resolved about two weeks back, so aside from the occasional av1 issues, I’d consider the X4Q+ the best CE device i’ve ever tested. i had also used one of the homatics boxes that CE supports, but gave it to a friend.
One more note, I have this connected through an hdmi switch (that’s shared with a steam deck and a ps5) to a usb-powered 4k hdr display. CEC works fine, passthrough audio works fine, color depth displays exactly, it’s just a butter smooth experience.
i’m no ugoos evangelist, but the hardware is really solid and fairly cheap and hasn’t failed me yet. i’ve been running this setup for about 2 years (iirc) and probably won’t be needing to upgrade for a while.
edit: for clarification on speed and image caching, my library has roughly 1600 movies, 140 shows with about 5200 episodes, and everything is scraped. there’s never any image loading issues like there is on slower hardware like the rpi and odroid.
I have a similar experience with the am6b+ and a similar sized library. Even on the stock android browsing my iptv provider which has 23,000+ channels has no issue
But you mention cec - does the x4q+ power off and on with the original display remote? That’s my one nag about the am6b+. Ugoos locked the boot loader and refuses to unlock so cec power on doesn’t work, every other cec command does though.
I just have it wake on lan by having homeassistant send it a packet when it notices my avr turns out as a workaround but this isn’t the most elegant solution and like 1:20 times it hiccups
Depends on what you want to watch. Streaming services do limit DRM content even if you’re on a windows machine and using HDMI. If your sailing the seas then there should be no problem with the raspberry pi. You could install a container with Jellyfin or plex and Tailscale and access it from wherever you want
I do have a Jellyfin server, this is mainly about being able to use the subscriptions I happen to already pay for. Decoding on the pi is actually quite decent with hvec and x264.
Following on this, I’d like some sort of dongle capable of running Lineage OS. I only need it to run Jellyfin and some other fdroid apps. Any suggestions?
Raspberry Pi?
Thanks…That’s a bit clunkier than what I’d like. Yeah you can set it up to work as an Android TV device, but you still need to get the box and a remote on your own.
I don’t think what you’re looking for exists.
Media boxes up to $100 run usually Android (meaning: with Play Store).
I’m not sure what do you mean by any of this. Which media boxes? and, are any of them meant to be able to install LOS?
My bad, it’s called Streaming Media Player.
